FLUSH FIT STANDARD FEMALE HOSE TAIL FFF1

Steel bodied low profile coupling system for full bore internal flow path with smallest possible exterior dimensions
The staple is retained fully within the coupling profile to be snag-free
Available in standard and super configurations (Standard configuration design varies according to fitting size)
The Super form embodies a secondary O-Ring to maintain a clean environment in the main bore
A clearance area simplifies staple extraction
Fewer loose parts than similar designs

Product Details

Application

Standard Series: low to medium pressure large bore lines (pressure and return) where the application requires a smooth exterior profile to avoid snagging
Super Series: extra high pressure large bore lines where the application requires a smooth exterior profile to avoid snagging.
Refer Pirtek for selection of suitable hoses to use with Flushfit Standard and Super fittings.

Materials and Specifications
Flat Teflon backup ring. Nitrile O-Rings. Free cutting steel body. Hardened staple in either single width (Standard design) or double width (Super design). 2" material conforms to ( BS 970-080M47) (UNI EN C45). 2 1/2" material 50 D (BS 4360-90) (UNI EN S355J2G3 extruded tube). Alternatively material conforms to ( BS 970-230M07) (UNI EN 11SMnPb30).

Notes
LOW PROFILE COUPLING STANDARD AND SUPER. Suited to use with wire braided hydraulic hose

Series
MINING PRODUCTS

Material
Steel

Product Table

Item	Nom Bore Flush Fit Dash	Nom Bore Flush Fit DN	Nom Bore Flush Fit Inch	Nom Bore Hose Dash	Nom Bore Hose DN	Nom Bore Hose Inch	Dim mm COF	Dim mm L	Dim mm OD
FFF1-4024J	24	40	1.1/2"	24	40	1.1/2"	53.5	65.4	70
FFF1-5032J	32	50	2"	32	50	2"
FFF1-6340J	40	63	2.1/2"	40	63	2.1/2"