INDUSTRIAL ASSEMBLY PRODUCTS REFER PIRTEK FOR MSDS SHEETS. Low Pressure Pipe Seal - White PROTECT IAS72

IAS72 White Pipeseal is an instant low pressure sealant for fine and coarse threads up to 2" in diameter. S72 does not fully cure until some 60 hours after application, allowing re-alignment of elbows and joints

Product Details

Application
Sealing & Gasketing. Replaces tapes and dopes, stops gas and fluid leaks on most metals and assists in lubricating during assembly. IAS72 will not shred or tear which would contaminate your system. Use IAS72 to seal against oils, gases, chemicals, water, steam, etc

Useful Hint
Wipe threads with clean shop cloth. Apply a continuous bead to 3rd or 4th thread depending on the thread length

Properties
Instantaneous low pressure seal. No locking action up to 48 hours. Easy break loose allowing re-alignment

Procedure for Application
Ensure parts are clean, dry and free from oil and grease. Degreasing directly assists results

Compatible Accelerators Primers
Not recommended

Tech Features
Resin: Dimethacrylate. Colour: White Paste. Cure Speed w/ Activator: Not Recommended. Cure Speed W/out Activator: Up to 60 hours. Viscosity: 20,000cps. Gap Fill: 0.4mm. Flash Point: >85 degrees C. Shelf Life: 12 months @ 20 degrees C. Specific Gravity: 1.25

Notes
Consult Pirtek for MSDS Sheets for all Industrial Assembly Products

Temperature Range
-55 degrees C to + 150 degrees C

Product Table

Item	Notes
IAS72-50	Low Pressure Pipe Seal - White. IAS72 in 50 ml tube.